Инженерный калькулятор
Series Capacitor and Balancing Resistor Calculator
How to read the diagram. Two capacitors in series across the DC bus, each with a balancing resistor across it. Leakage, not capacitance, sets the steady-state division; the resistors swamp the leakage difference and hold the midpoint at Vx.
Two capacitors in series do not share voltage by capacitance alone; under steady DC, leakage decides it. This calculator gives total capacitance, the capacitive split and the balancing resistor that dominates leakage spread.
входные
Результаты
- Series capacitance
- -
- Voltage across C1
- -
- Voltage across C2
- -
- Balancing resistor per unit
- -
- Dissipation per resistor
- -
Формула
1/C = 1/C1 + 1/C2. For AC or fast transients the voltage divides inversely with capacitance: V1 = V × C2 / (C1 + C2). For steady DC the split follows leakage current, so equal capacitors with unequal leakage can drift far apart; a resistor across each unit forces the split to follow the resistor ratio.
What the calculator does not include
- Turn-on transient. At the instant voltage is applied the split is capacitive even when the steady state is resistive. Both conditions must be checked.
- Leakage spread. Insulation resistance of nominally identical parts can differ by several times, so the balancing resistor has to be low enough to swamp that spread.
- Resistor voltage rating. Each balancing resistor sees the full voltage of its own capacitor, not the string voltage.
Выбор деталей
The balancing resistor is a high-value thick film part: плоскостной to 35 kV per body, or a панель питания выше, чем.
Send the calculated values and the duty: запросить техническое предложение, response within 6 hours.